RTK Base Station RTK Fix Base Station RTK GNSS Receiver RTK Rover

Setting Up the ByNav C2-M2X RTK GNSS Module as Either an RTK Base or Rover

GPSWebShop Official November 9, 2023 No Comments

Prerequisites/Requirements:

ByNav C2-M2X RTK GNSS Module EVB (Evaluation Board) – Available for purchase on our website.
Tri-Band GNSS Antenna – Can be bought alongside the C2-M2X module from our website.
A Windows computer with Internet access.

If you intend to set up an RTK Base, please skip Section 4.
If you want to set up an RTK Rover, skip Section 3.

1. Installation of the Driver and Configuration Tool

A. When you receive the C2, first download and install the USB driver (Please download the CH340/341 Driver Here), then connect it to a Windows computer. Next, open the Windows Device Manager. You will find two ‘USB-Enhanced-SERIAL’ ports listed under ‘Ports (COM & LPT)’. Refer to the screenshot below for an example:

In our example, the C2 is recognized as two COM ports: COM12 and COM15. (Note that the COM port numbers on your computer may differ.) Please record these two COM port numbers, as you will need them for later steps in these instructions.

B. Download and install the By_connect software from the ByNav official download page. Once installed, launch the software and click on the ‘Connection Setting’ button. Select the COM port numbers you noted down in step A for the ‘Input_1’ column in both lines 1 and 2. For our example, we chose COM12 and COM15. Then, select ‘11520’ for the ‘Input_2’ column. In the ‘Done’ column, select ‘Open’.

2. Identifying Your Internal and External COM Ports

For the C2-M2X evaluation board, understanding the distinction between internal and external COM ports is essential. The internal COM port, which is not directly exposed externally, requires mapping to an external COM port for external accessibility. The external COM port is the one that your computer recognizes as part of the C2-M2X board, and it is typically displayed in the ‘Device Manager.’

Each external COM port maps directly to an internal COM port. To ascertain which internal COM port is mapped to an external one, use the By_connect software. In the ‘Select CONN:’ dropdown menu, select one of the two COM ports displayed. For example, I initially chose COM12. Enter the command ‘LOG LOGLIST’ in the input box and press ‘Enter.’ The resulting output will reveal an internal COM port number that maps to this external COM port (COM12).

Please refer to the screenshot provided below. In our example, it indicates COM3, which appears in the line just below the ‘<OK’ prompt. Here, it’s shown that the external COM port COM12 is mapped to the internal COM port COM3.

Then, using the ‘Select CONN’ dropdown menu again, choose the other COM port (COM15) and repeat the process. In this instance, it will reveal that the internal ‘COM1’ is mapped to the external ‘COM15’.

3. Configuring the C2-M2X Board as an RTK Base

(If you wish to configure the C2-M2X as an RTK Rover, please skip this section and proceed directly to Section 4.)

To set up the C2-M2X board as an RTK Base GNSS receiver, simply choose one of the two internal COM ports at random and configure it for RTCM protocol and messages. In my case, I selected the internal COM port COM1 for RTCM protocol and message. Below is the template for the necessary commands.

RTKTYPE BASE
FRESET
LOG COMX RTCM1074 ONTIME 1
LOG COMX RTCM1084 ONTIME 1
LOG COMX RTCM1094 ONTIME 1
LOG COMX RTCM1114 ONTIME 1
LOG COMX RTCM1124 ONTIME 1
LOG COMX RTCM1006 ONTIME 5
LOG COMX RTCM1033 ONTIME 10
INTERFACEMODE COMX RTCM RTCM
SAVECONFIG
REBOOT

We need to replace ‘COMX’ with ‘COM1’ in the code below. After updating, the code will appear as follows:

RTKTYPE BASE
FRESET
LOG COM1 RTCM1074 ONTIME 1
LOG COM1 RTCM1084 ONTIME 1
LOG COM1 RTCM1094 ONTIME 1
LOG COM1 RTCM1114 ONTIME 1
LOG COM1 RTCM1124 ONTIME 1
LOG COM1 RTCM1006 ONTIME 5
LOG COM1 RTCM1033 ONTIME 10
INTERFACEMODE COM1 RTCM RTCM
SAVECONFIG
REBOOT

Let’s execute the code to complete the configuration.

A. Copy and paste the following two commands into the input box of the By_connect software, then press Enter to execute them. These commands will switch the C2-M2X to RTK Base mode, reset it to its default configuration, and then reboot it.

RTKTYPE BASE
FRESET

B. Copy and paste the command block provided below into the input box of the By_connect software. Press Enter to execute the commands. This will configure RTCM messages to the internal COM port COM1 and force it to utilize the RTCM protocol.

LOG COM1 RTCM1074 ONTIME 1
LOG COM1 RTCM1084 ONTIME 1
LOG COM1 RTCM1094 ONTIME 1
LOG COM1 RTCM1114 ONTIME 1
LOG COM1 RTCM1124 ONTIME 1
LOG COM1 RTCM1006 ONTIME 5
LOG COM1 RTCM1033 ONTIME 10
INTERFACEMODE COM1 RTCM RTCM

C. Finally, execute the following two commands, which will save the configuration and restart the C2-M2X board.

SAVECONFIG
REBOOT

Your C2-M2X is now operational as an RTK Base GNSS Receiver and is ready for use.

If you need to stream the RTK base data to an NTRIP caster, the STRSVR program from RTKlib can be used as the NTRIP server. For detailed instructions, please refer to the document titled “Build Your Very Own NTRIP Infrastructure.” In our setup above, since we have configured the internal COM port COM1 (mapped to the external COM port COM15) to output RTCM correction data, we should use serial port COM15 as input serial port in the mentioned document.

4. Configuring the C2-M2X Board as an RTK Rover

(If you wish to configure the C2-M2X as an RTK Base, please skip this section.)

To set up the C2-M2X as an RTK Rover, you need to select one internal COM port to output NMEA data, and another internal COM port for RTCM correction data. In my case, I chose internal COM port COM3 for NMEA output and COM1 for RTCM data. Below is the template for the necessary commands.

RTKTYPE ROVER
FRESET
LOG COMX GPGGA ONTIME 0.2
LOG COMX BESTPOSA ONTIME 0.2
INTERFACEMODE COMY RTCM RTCM
SAVECONFIG
REBOOT

We need to replace ‘COMX’ with ‘COM1’ and ‘COMY’ with ‘COM3’. After updating, the block of code will appear as follows:

RTKTYPE ROVER
FRESET
LOG COM3 GPGGA ONTIME 0.2
LOG COM3 BESTPOSA ONTIME 0.2
INTERFACEMODE COM1 RTCM RTCM
SAVECONFIG
REBOOT

Let’s execute the code to complete the configuration.

A. Copy and paste the following two commands into the input box of the By_connect software, then press Enter to execute them. These commands will switch the C2-M2X to RTK Rover mode, reset it to its default configuration, and then reboot it.

RTKTYPE ROVER
FRESET

B. Copy and paste the command block provided below into the input box of the By_connect software. Press Enter to run the commands. This will set up RTCM protocol on the internal COM port COM1 and configure the output of certain NMEA messages on the internal COM port COM3.

LOG COM3 GPGGA ONTIME 0.2
LOG COM3 BESTPOSA ONTIME 0.2
INTERFACEMODE COM1 RTCM RTCM

C. Finally, execute the following two commands, which will save the configuration and restart the C2-M2X board.

SAVECONFIG
REBOOT

Now, your C2 is functioning as an RTK Rover.

To test it, go to the ‘Connection Setting’ and open the NMEA port (which is COM12 in this instance), while closing the RTCM COM port (COM15 in my case). Click on the ‘Config RTCM’ button and set up the NTRIP Client settings. The settings are from your NTRIP Caster provider, and the external COM port (COM15 in our case). Press the ‘Start’ button once you’ve completed these steps.

You will soon see the solution status change to ‘NARROW_INT,’ indicating an RTK fixed position. Please refer to the screenshot below for reference.

5. Optional information

The following 3 commands are very useful for configuring or troubleshooting the C2-M2X board.

A. The ‘Log loglist‘ command provides valuable information, including which messages are configured to output from which internal port. It also indicates which internal COM port is mapped to the selected external COM port. For instance, as shown in the screenshot below, the external COM port COM12 is mapped to the internal COM port COM3.

B. The ‘Log comconfig‘ command is used to query the internal COM port’s baud rate, input, and output protocols. For instance, the screenshot below illustrates that for the internal port COM1, both the input and output protocol are set to RTCM.

C. The ‘rtktype‘ command is used to determine the current operational mode of the C2-M2X, whether as an RTK Base or RTK Rover. Please see the example in the screenshot below:

ByNav C2-M2X RTK GNSS Module can be purchased from:

https://gpswebshop.com (US & WorldWide)
https://canadagps.ca (Canada)

Leave a Reply Cancel reply

You must be logged in to post a comment.

collapsCat options: Array ( [title] => Blog Categories [showPostCount] => 1 [inExclude] => exclude [inExcludeCats] => [showPosts] => 1 [showPages] => 0 [linkToCat] => 0 [olderThan] => 0 [excludeAll] => 0 [catSortOrder] => ASC [catSort] => catName [postSortOrder] => ASC [postSort] => postTitle [expand] => 0 [defaultExpand] => GPS / GNSS by OS, RTK GNSS, RTK Base Station, RTK Rover [debug] => 1 [postTitleLength] => 0 [catfeed] => none [taxonomy] => category [post_type] => post [postDateAppend] => after [postDateFormat] => m/d [showPostDate] => 1 [useCookies] => 1 [postsBeforeCats] => 1 [expandCatPost] => 1 [showEmptyCat] => 1 [showTopLevel] => 1 [useAjax] => 0 [customExpand] => [customCollapse] => [style] => kubrick [accordion] => 1 [title_link] => [addMisc] => 1 [addMiscTitle] => [number] => 2 [includeCatArray] => Array ( ) [expandSym] => ► [collapseSym] => ▼ ) postsToExclude: Array ( ) CATEGORY QUERY RESULTS Array ( [0] => WP_Term Object ( [term_id] => 35 [name] => GPS / GNSS by Android [slug] => gps-gnss-by-android [term_group] => 0 [term_taxonomy_id] => 35 [taxonomy] => category [description] => [parent] => 7 [count] => 9 [filter] => raw ) [1] => WP_Term Object ( [term_id] => 36 [name] => GPS / GNSS by IOS [slug] => gps-gnss-by-ios [term_group] => 0 [term_taxonomy_id] => 36 [taxonomy] => category [description] => [parent] => 7 [count] => 0 [filter] => raw ) [2] => WP_Term Object ( [term_id] => 37 [name] => GPS / GNSS by Linux [slug] => gps-gnss-by-linux [term_group] => 0 [term_taxonomy_id] => 37 [taxonomy] => category [description] => [parent] => 7 [count] => 2 [filter] => raw ) [3] => WP_Term Object ( [term_id] => 34 [name] => GPS / GNSS by MacOS [slug] => gps-gnss-by-macos [term_group] => 0 [term_taxonomy_id] => 34 [taxonomy] => category [description] => [parent] => 7 [count] => 0 [filter] => raw ) [4] => WP_Term Object ( [term_id] => 7 [name] => GPS / GNSS by OS [slug] => gps-gnss-by-os [term_group] => 0 [term_taxonomy_id] => 7 [taxonomy] => category [description] => Racing GNSS description [parent] => 0 [count] => 0 [filter] => raw ) [5] => WP_Term Object ( [term_id] => 33 [name] => GPS / GNSS by Windows [slug] => gps-gnss-by-windows [term_group] => 0 [term_taxonomy_id] => 33 [taxonomy] => category [description] => [parent] => 7 [count] => 7 [filter] => raw ) [6] => WP_Term Object ( [term_id] => 48 [name] => PPK [slug] => ppk-technology [term_group] => 0 [term_taxonomy_id] => 48 [taxonomy] => category [description] => PPK technology [parent] => 0 [count] => 3 [filter] => raw ) [7] => WP_Term Object ( [term_id] => 8 [name] => RTK Base Station [slug] => rtk-base-station [term_group] => 0 [term_taxonomy_id] => 8 [taxonomy] => category [description] => RTK Base Station desciption [parent] => 32 [count] => 4 [filter] => raw ) [8] => WP_Term Object ( [term_id] => 9 [name] => RTK Fix Base Station [slug] => rtk-fix-base-station [term_group] => 0 [term_taxonomy_id] => 9 [taxonomy] => category [description] => RTK Fix Base Station [parent] => 8 [count] => 9 [filter] => raw ) [9] => WP_Term Object ( [term_id] => 32 [name] => RTK GNSS [slug] => rtk-technology [term_group] => 0 [term_taxonomy_id] => 32 [taxonomy] => category [description] => Real-time kinematic (RTK) positioning technology [parent] => 0 [count] => 1 [filter] => raw ) [10] => WP_Term Object ( [term_id] => 13 [name] => RTK GNSS logger [slug] => rtk-gnss-logger [term_group] => 0 [term_taxonomy_id] => 13 [taxonomy] => category [description] => RTK GNSS logger desc [parent] => 12 [count] => 8 [filter] => raw ) [11] => WP_Term Object ( [term_id] => 14 [name] => RTK GNSS Receiver [slug] => rtk-gnss-receiver [term_group] => 0 [term_taxonomy_id] => 14 [taxonomy] => category [description] => RTK GNSS Receiver desc [parent] => 12 [count] => 15 [filter] => raw ) [12] => WP_Term Object ( [term_id] => 10 [name] => RTK Moving Base Station [slug] => rtk-moving-base-station [term_group] => 0 [term_taxonomy_id] => 10 [taxonomy] => category [description] => RTK Moving Base Station description [parent] => 8 [count] => 0 [filter] => raw ) [13] => WP_Term Object ( [term_id] => 11 [name] => RTK NTRIP [slug] => rtk-ntrip [term_group] => 0 [term_taxonomy_id] => 11 [taxonomy] => category [description] => RTK NTRIP desc [parent] => 32 [count] => 8 [filter] => raw ) [14] => WP_Term Object ( [term_id] => 42 [name] => RTK Portable Base Station [slug] => rtk-portable-base-station [term_group] => 0 [term_taxonomy_id] => 42 [taxonomy] => category [description] => RTK Portable Base Station Description [parent] => 8 [count] => 6 [filter] => raw ) [15] => WP_Term Object ( [term_id] => 12 [name] => RTK Rover [slug] => rtk-rover [term_group] => 0 [term_taxonomy_id] => 12 [taxonomy] => category [description] => [parent] => 32 [count] => 1 [filter] => raw ) [16] => WP_Term Object ( [term_id] => 46 [name] => RTK Software [slug] => rtk-software [term_group] => 0 [term_taxonomy_id] => 46 [taxonomy] => category [description] => RTK Software [parent] => 32 [count] => 3 [filter] => raw ) [17] => WP_Term Object ( [term_id] => 6 [name] => Sub-Meter GPS / GNSS [slug] => sub-meter-gps-gnss [term_group] => 0 [term_taxonomy_id] => 6 [taxonomy] => category [description] => [parent] => 0 [count] => 7 [filter] => raw ) [18] => WP_Term Object ( [term_id] => 1 [name] => Uncategorized [slug] => uncategorized [term_group] => 0 [term_taxonomy_id] => 1 [taxonomy] => category [description] => [parent] => 0 [count] => 1 [filter] => raw ) ) POST QUERY: select ID, slug, date(post_date) as date, post_status, post_type, post_date, post_author, post_title, post_name, name, object_id, t.term_id from wp_term_relationships AS tr, wp_posts AS p, wp_terms AS t, wp_term_taxonomy AS tt WHERE tt.term_id = t.term_id AND object_id=ID AND post_status='publish' AND tr.term_taxonomy_id = tt.term_taxonomy_id AND tt.taxonomy IN ('category') AND post_type='post' ORDER BY p.post_title ASC POST QUERY RESULTS Array ( [0] => stdClass Object ( [ID] => 1060 [slug] => rtk-software [date] => 2023-07-14 [post_status] => publish [post_type] => post [post_date] => 2023-07-14 17:37:05 [post_author] => 2 [post_title] => A Step-by-Step Guide for Downloading and Installing RTKLib [post_name] => a-step-by-step-guide-to-downloading-and-installing-rtklib [name] => RTK Software [object_id] => 1060 [term_id] => 46 ) [1] => stdClass Object ( [ID] => 1139 [slug] => rtk-fix-base-station [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 22:24:08 [post_author] => 2 [post_title] => Build your very own NTRIP RTK Base with just an RTK GNSS Receiver and 5 minutes [post_name] => build-your-very-own-ntrip-infrastructure-with-just-an-rtk-gnss-receiver-and-5-minutes [name] => RTK Fix Base Station [object_id] => 1139 [term_id] => 9 ) [2] => stdClass Object ( [ID] => 1139 [slug] => rtk-ntrip [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 22:24:08 [post_author] => 2 [post_title] => Build your very own NTRIP RTK Base with just an RTK GNSS Receiver and 5 minutes [post_name] => build-your-very-own-ntrip-infrastructure-with-just-an-rtk-gnss-receiver-and-5-minutes [name] => RTK NTRIP [object_id] => 1139 [term_id] => 11 ) [3] => stdClass Object ( [ID] => 1139 [slug] => rtk-portable-base-station [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 22:24:08 [post_author] => 2 [post_title] => Build your very own NTRIP RTK Base with just an RTK GNSS Receiver and 5 minutes [post_name] => build-your-very-own-ntrip-infrastructure-with-just-an-rtk-gnss-receiver-and-5-minutes [name] => RTK Portable Base Station [object_id] => 1139 [term_id] => 42 ) [4] => stdClass Object ( [ID] => 510 [slug] => rtk-ntrip [date] => 2021-10-18 [post_status] => publish [post_type] => post [post_date] => 2021-10-18 21:07:00 [post_author] => 2 [post_title] => Connecting a Bluetooth RTK GNSS Receiver to an NTRIP Mount Point via an Android Phone: A Step-by-Step Guide [post_name] => connecting-a-bluetooth-rtk-gnss-receiver-to-an-ntrip-mount-point-via-an-android-phone-a-step-by-step-guide [name] => RTK NTRIP [object_id] => 510 [term_id] => 11 ) [5] => stdClass Object ( [ID] => 510 [slug] => rtk-gnss-receiver [date] => 2021-10-18 [post_status] => publish [post_type] => post [post_date] => 2021-10-18 21:07:00 [post_author] => 2 [post_title] => Connecting a Bluetooth RTK GNSS Receiver to an NTRIP Mount Point via an Android Phone: A Step-by-Step Guide [post_name] => connecting-a-bluetooth-rtk-gnss-receiver-to-an-ntrip-mount-point-via-an-android-phone-a-step-by-step-guide [name] => RTK GNSS Receiver [object_id] => 510 [term_id] => 14 ) [6] => stdClass Object ( [ID] => 1444 [slug] => rtk-gnss-receiver [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:03:32 [post_author] => 2 [post_title] => Enabling GR-9029 High-Precision GNSS Data Sharing with Other Android Apps [post_name] => enabling-gr-9029-high-precision-gnss-data-sharing-with-other-android-apps [name] => RTK GNSS Receiver [object_id] => 1444 [term_id] => 14 ) [7] => stdClass Object ( [ID] => 1444 [slug] => gps-gnss-by-android [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:03:32 [post_author] => 2 [post_title] => Enabling GR-9029 High-Precision GNSS Data Sharing with Other Android Apps [post_name] => enabling-gr-9029-high-precision-gnss-data-sharing-with-other-android-apps [name] => GPS / GNSS by Android [object_id] => 1444 [term_id] => 35 ) [8] => stdClass Object ( [ID] => 1546 [slug] => rtk-gnss-receiver [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:03:17 [post_author] => 2 [post_title] => Enabling GR-903 High-Precision GNSS Data Sharing with Other Android Apps [post_name] => enabling-gr-903-high-precision-gnss-data-sharing-with-other-android-apps [name] => RTK GNSS Receiver [object_id] => 1546 [term_id] => 14 ) [9] => stdClass Object ( [ID] => 1546 [slug] => gps-gnss-by-android [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:03:17 [post_author] => 2 [post_title] => Enabling GR-903 High-Precision GNSS Data Sharing with Other Android Apps [post_name] => enabling-gr-903-high-precision-gnss-data-sharing-with-other-android-apps [name] => GPS / GNSS by Android [object_id] => 1546 [term_id] => 35 ) [10] => stdClass Object ( [ID] => 1633 [slug] => rtk-base-station [date] => 2024-01-24 [post_status] => publish [post_type] => post [post_date] => 2024-01-24 09:52:30 [post_author] => 2 [post_title] => Explanation of Fixed Position, Survey-in, PCO, and ARP in Navisys GR-9028 (or GR-903 Base) Settings. [post_name] => navisys-gr-9028-base-settings-explained [name] => RTK Base Station [object_id] => 1633 [term_id] => 8 ) [11] => stdClass Object ( [ID] => 1633 [slug] => rtk-fix-base-station [date] => 2024-01-24 [post_status] => publish [post_type] => post [post_date] => 2024-01-24 09:52:30 [post_author] => 2 [post_title] => Explanation of Fixed Position, Survey-in, PCO, and ARP in Navisys GR-9028 (or GR-903 Base) Settings. [post_name] => navisys-gr-9028-base-settings-explained [name] => RTK Fix Base Station [object_id] => 1633 [term_id] => 9 ) [12] => stdClass Object ( [ID] => 1633 [slug] => rtk-portable-base-station [date] => 2024-01-24 [post_status] => publish [post_type] => post [post_date] => 2024-01-24 09:52:30 [post_author] => 2 [post_title] => Explanation of Fixed Position, Survey-in, PCO, and ARP in Navisys GR-9028 (or GR-903 Base) Settings. [post_name] => navisys-gr-9028-base-settings-explained [name] => RTK Portable Base Station [object_id] => 1633 [term_id] => 42 ) [13] => stdClass Object ( [ID] => 1642 [slug] => rtk-gnss-logger [date] => 2024-01-24 [post_status] => publish [post_type] => post [post_date] => 2024-01-24 09:52:37 [post_author] => 2 [post_title] => Explanation of Geodesic distance, Ground distance, PCO & APR in Navisys GR-9029 (or GR-903 Rover) Settings. [post_name] => navisys-gr-9029-rover-settings-explained [name] => RTK GNSS logger [object_id] => 1642 [term_id] => 13 ) [14] => stdClass Object ( [ID] => 1642 [slug] => rtk-gnss-receiver [date] => 2024-01-24 [post_status] => publish [post_type] => post [post_date] => 2024-01-24 09:52:37 [post_author] => 2 [post_title] => Explanation of Geodesic distance, Ground distance, PCO & APR in Navisys GR-9029 (or GR-903 Rover) Settings. [post_name] => navisys-gr-9029-rover-settings-explained [name] => RTK GNSS Receiver [object_id] => 1642 [term_id] => 14 ) [15] => stdClass Object ( [ID] => 681 [slug] => sub-meter-gps-gnss [date] => 2021-10-20 [post_status] => publish [post_type] => post [post_date] => 2021-10-20 11:00:00 [post_author] => 2 [post_title] => Exploring the 5Hz Logging Mode on the Columbus P-10 Pro [post_name] => exploring-the-5hz-logging-mode-on-the-columbus-p-10-pro [name] => Sub-Meter GPS / GNSS [object_id] => 681 [term_id] => 6 ) [16] => stdClass Object ( [ID] => 1721 [slug] => uncategorized [date] => 2024-02-24 [post_status] => publish [post_type] => post [post_date] => 2024-02-24 11:45:03 [post_author] => 2 [post_title] => Heading RTK GNSS Receivers [post_name] => heading-rtk-gnss-receivers [name] => Uncategorized [object_id] => 1721 [term_id] => 1 ) [17] => stdClass Object ( [ID] => 1330 [slug] => rtk-gnss-logger [date] => 2023-12-14 [post_status] => publish [post_type] => post [post_date] => 2023-12-14 21:28:53 [post_author] => 2 [post_title] => High-Precision Waypoint Collecting Using Navisys GR-9029 RTK GNSS [post_name] => collect-waypoints-with-centimeter-level-accuracy-using-navisys-gr-9029 [name] => RTK GNSS logger [object_id] => 1330 [term_id] => 13 ) [18] => stdClass Object ( [ID] => 1631 [slug] => rtk-base-station [date] => 2024-05-24 [post_status] => publish [post_type] => post [post_date] => 2024-05-24 09:52:42 [post_author] => 2 [post_title] => How accurate does your RTK base need to be? [post_name] => rtk-base-accuracy-fixed-position-vs-survey-in-methods-explained [name] => RTK Base Station [object_id] => 1631 [term_id] => 8 ) [19] => stdClass Object ( [ID] => 1933 [slug] => rtk-fix-base-station [date] => 2024-08-30 [post_status] => publish [post_type] => post [post_date] => 2024-08-30 13:55:32 [post_author] => 2 [post_title] => How to configure the Columbus EX-1 as an RTK/PPK Base Station in a Production Environment [post_name] => how-to-configure-the-columbus-ex-1-as-an-rtk-ppk-base-station-in-a-production-environment [name] => RTK Fix Base Station [object_id] => 1933 [term_id] => 9 ) [20] => stdClass Object ( [ID] => 1933 [slug] => rtk-portable-base-station [date] => 2024-08-30 [post_status] => publish [post_type] => post [post_date] => 2024-08-30 13:55:32 [post_author] => 2 [post_title] => How to configure the Columbus EX-1 as an RTK/PPK Base Station in a Production Environment [post_name] => how-to-configure-the-columbus-ex-1-as-an-rtk-ppk-base-station-in-a-production-environment [name] => RTK Portable Base Station [object_id] => 1933 [term_id] => 42 ) [21] => stdClass Object ( [ID] => 1933 [slug] => ppk-technology [date] => 2024-08-30 [post_status] => publish [post_type] => post [post_date] => 2024-08-30 13:55:32 [post_author] => 2 [post_title] => How to configure the Columbus EX-1 as an RTK/PPK Base Station in a Production Environment [post_name] => how-to-configure-the-columbus-ex-1-as-an-rtk-ppk-base-station-in-a-production-environment [name] => PPK [object_id] => 1933 [term_id] => 48 ) [22] => stdClass Object ( [ID] => 729 [slug] => gps-gnss-by-windows [date] => 2021-06-25 [post_status] => publish [post_type] => post [post_date] => 2021-06-25 10:33:00 [post_author] => 2 [post_title] => How to confirm your ublox GNSS receiver is installed correctly for Windows Sensor API and location API? [post_name] => how-to-confirm-your-ublox-gnss-receiver-is-installed-correctly-for-windows-sensor-api-and-location-api [name] => GPS / GNSS by Windows [object_id] => 729 [term_id] => 33 ) [23] => stdClass Object ( [ID] => 23 [slug] => gps-gnss-by-android [date] => 2021-05-09 [post_status] => publish [post_type] => post [post_date] => 2021-05-09 15:23:00 [post_author] => 2 [post_title] => How to connect a Bluetooth GPS Receiver with an Android Device? [post_name] => how-to-connect-a-bluetooth-gps-receiver-with-an-android-device [name] => GPS / GNSS by Android [object_id] => 23 [term_id] => 35 ) [24] => stdClass Object ( [ID] => 15 [slug] => sub-meter-gps-gnss [date] => 2022-11-27 [post_status] => publish [post_type] => post [post_date] => 2022-11-27 15:18:00 [post_author] => 2 [post_title] => How to connect a GNSS Receiver to Windows Maps (or Windows Location Service)? [post_name] => how-to-connect-a-gnss-receiver-to-windows-maps-or-windows-location-service [name] => Sub-Meter GPS / GNSS [object_id] => 15 [term_id] => 6 ) [25] => stdClass Object ( [ID] => 15 [slug] => rtk-gnss-receiver [date] => 2022-11-27 [post_status] => publish [post_type] => post [post_date] => 2022-11-27 15:18:00 [post_author] => 2 [post_title] => How to connect a GNSS Receiver to Windows Maps (or Windows Location Service)? [post_name] => how-to-connect-a-gnss-receiver-to-windows-maps-or-windows-location-service [name] => RTK GNSS Receiver [object_id] => 15 [term_id] => 14 ) [26] => stdClass Object ( [ID] => 15 [slug] => gps-gnss-by-windows [date] => 2022-11-27 [post_status] => publish [post_type] => post [post_date] => 2022-11-27 15:18:00 [post_author] => 2 [post_title] => How to connect a GNSS Receiver to Windows Maps (or Windows Location Service)? [post_name] => how-to-connect-a-gnss-receiver-to-windows-maps-or-windows-location-service [name] => GPS / GNSS by Windows [object_id] => 15 [term_id] => 33 ) [27] => stdClass Object ( [ID] => 19 [slug] => gps-gnss-by-windows [date] => 2022-05-04 [post_status] => publish [post_type] => post [post_date] => 2022-05-04 15:21:00 [post_author] => 2 [post_title] => How to connect a GPS/GNSS Receiver to Google Earth on Windows? [post_name] => how-to-connect-a-gps-gnss-receiver-to-google-earth-on-windows [name] => GPS / GNSS by Windows [object_id] => 19 [term_id] => 33 ) [28] => stdClass Object ( [ID] => 508 [slug] => rtk-gnss-receiver [date] => 2021-10-20 [post_status] => publish [post_type] => post [post_date] => 2021-10-20 21:12:00 [post_author] => 2 [post_title] => How to Connect a USB/Bluetooth RTK GNSS Receiver to Windows? (Accessing NTRIP Through an Android Phone's Internet Connection) [post_name] => how-to-connect-a-usb-bluetooth-rtk-gnss-receiver-to-windows-accessing-ntrip-through-an-android-phones-internet-connection [name] => RTK GNSS Receiver [object_id] => 508 [term_id] => 14 ) [29] => stdClass Object ( [ID] => 508 [slug] => gps-gnss-by-windows [date] => 2021-10-20 [post_status] => publish [post_type] => post [post_date] => 2021-10-20 21:12:00 [post_author] => 2 [post_title] => How to Connect a USB/Bluetooth RTK GNSS Receiver to Windows? (Accessing NTRIP Through an Android Phone's Internet Connection) [post_name] => how-to-connect-a-usb-bluetooth-rtk-gnss-receiver-to-windows-accessing-ntrip-through-an-android-phones-internet-connection [name] => GPS / GNSS by Windows [object_id] => 508 [term_id] => 33 ) [30] => stdClass Object ( [ID] => 21 [slug] => gps-gnss-by-linux [date] => 2021-06-13 [post_status] => publish [post_type] => post [post_date] => 2021-06-13 15:22:00 [post_author] => 2 [post_title] => How to connect an usb GPS receiver to a Linux computer? [post_name] => how-to-connect-an-usb-gps-receiver-to-a-linux-computer [name] => GPS / GNSS by Linux [object_id] => 21 [term_id] => 37 ) [31] => stdClass Object ( [ID] => 713 [slug] => gps-gnss-by-linux [date] => 2021-06-14 [post_status] => publish [post_type] => post [post_date] => 2021-06-14 10:10:00 [post_author] => 2 [post_title] => How to connect an usb GPS receiver with a Raspberry PI? [post_name] => how-to-connect-an-usb-gps-receiver-with-a-raspberry-pi [name] => GPS / GNSS by Linux [object_id] => 713 [term_id] => 37 ) [32] => stdClass Object ( [ID] => 355 [slug] => gps-gnss-by-android [date] => 2021-05-17 [post_status] => publish [post_type] => post [post_date] => 2021-05-17 14:34:00 [post_author] => 2 [post_title] => How to connect an USB GPS receiver with an Android Device? [post_name] => how-to-connect-an-usb-gps-receiver-with-an-android-device [name] => GPS / GNSS by Android [object_id] => 355 [term_id] => 35 ) [33] => stdClass Object ( [ID] => 17 [slug] => gps-gnss-by-windows [date] => 2021-04-18 [post_status] => publish [post_type] => post [post_date] => 2021-04-18 15:20:00 [post_author] => 2 [post_title] => How to connect GNSS200L / GNSS100L USB GNSS Receiver to Windows Maps (or Windows Location Service)? [post_name] => how-to-connect-gnss200l-gnss100l-usb-gnss-receiver-to-windows-maps-or-windows-location-service [name] => GPS / GNSS by Windows [object_id] => 17 [term_id] => 33 ) [34] => stdClass Object ( [ID] => 2145 [slug] => rtk-portable-base-station [date] => 2023-12-01 [post_status] => publish [post_type] => post [post_date] => 2023-12-01 10:57:16 [post_author] => 2 [post_title] => How to Connect Your RTK Base to Ardupilot Mission Planner [post_name] => how-to-connect-your-rtk-base-to-ardupilot-mission-planner [name] => RTK Portable Base Station [object_id] => 2145 [term_id] => 42 ) [35] => stdClass Object ( [ID] => 689 [slug] => sub-meter-gps-gnss [date] => 2019-06-24 [post_status] => publish [post_type] => post [post_date] => 2019-06-24 15:32:00 [post_author] => 2 [post_title] => How to enable SBAS for Columbus P-7 Pro? [post_name] => how-to-enable-sbas-for-columbus-p-7-pro [name] => Sub-Meter GPS / GNSS [object_id] => 689 [term_id] => 6 ) [36] => stdClass Object ( [ID] => 393 [slug] => rtk-fix-base-station [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:06:00 [post_author] => 2 [post_title] => How to obtain a highly accurate coordinate for your RTK base station using PPP method? [post_name] => how-to-obtain-a-highly-accurate-coordinate-for-your-rtk-base-station [name] => RTK Fix Base Station [object_id] => 393 [term_id] => 9 ) [37] => stdClass Object ( [ID] => 410 [slug] => rtk-ntrip [date] => 2022-12-25 [post_status] => publish [post_type] => post [post_date] => 2022-12-25 21:33:00 [post_author] => 2 [post_title] => How to set up a free internet NTRIP caster mount point? [post_name] => how-to-set-up-a-free-internet-ntrip-caster-mount-point [name] => RTK NTRIP [object_id] => 410 [term_id] => 11 ) [38] => stdClass Object ( [ID] => 2197 [slug] => rtk-gnss-receiver [date] => 2023-12-02 [post_status] => publish [post_type] => post [post_date] => 2023-12-02 15:00:36 [post_author] => 2 [post_title] => How to Set Up the ByNav X8-M1 Bluetooth GNSS receiver as an RTK Rover on Android Using the "Bluetooth GNSS" App? [post_name] => how-to-set-up-the-bynav-x8-m1-bluetooth-gnss-receiver-as-an-rtk-rover-on-android-using-the-bluetooth-gnss-app [name] => RTK GNSS Receiver [object_id] => 2197 [term_id] => 14 ) [39] => stdClass Object ( [ID] => 2197 [slug] => gps-gnss-by-android [date] => 2023-12-02 [post_status] => publish [post_type] => post [post_date] => 2023-12-02 15:00:36 [post_author] => 2 [post_title] => How to Set Up the ByNav X8-M1 Bluetooth GNSS receiver as an RTK Rover on Android Using the "Bluetooth GNSS" App? [post_name] => how-to-set-up-the-bynav-x8-m1-bluetooth-gnss-receiver-as-an-rtk-rover-on-android-using-the-bluetooth-gnss-app [name] => GPS / GNSS by Android [object_id] => 2197 [term_id] => 35 ) [40] => stdClass Object ( [ID] => 2124 [slug] => rtk-gnss-receiver [date] => 2023-12-02 [post_status] => publish [post_type] => post [post_date] => 2023-12-02 15:00:30 [post_author] => 2 [post_title] => How to Set Up the ByNav X8-M1 Bluetooth GNSS receiver as an RTK Rover on Android Using the GBoxTools App? [post_name] => how-to-set-up-the-bynav-x8-m1-bluetooth-gnss-receiver-as-an-rtk-rover-on-android-using-the-gboxtools-app [name] => RTK GNSS Receiver [object_id] => 2124 [term_id] => 14 ) [41] => stdClass Object ( [ID] => 2124 [slug] => gps-gnss-by-android [date] => 2023-12-02 [post_status] => publish [post_type] => post [post_date] => 2023-12-02 15:00:30 [post_author] => 2 [post_title] => How to Set Up the ByNav X8-M1 Bluetooth GNSS receiver as an RTK Rover on Android Using the GBoxTools App? [post_name] => how-to-set-up-the-bynav-x8-m1-bluetooth-gnss-receiver-as-an-rtk-rover-on-android-using-the-gboxtools-app [name] => GPS / GNSS by Android [object_id] => 2124 [term_id] => 35 ) [42] => stdClass Object ( [ID] => 369 [slug] => rtk-fix-base-station [date] => 2022-12-24 [post_status] => publish [post_type] => post [post_date] => 2022-12-24 18:16:00 [post_author] => 2 [post_title] => How to setup an RTK Base station using a USB / Bluetooth RTK GNSS Receiver? [post_name] => how-to-setup-an-rtk-base-station-using-a-rtk-gnss-receiver [name] => RTK Fix Base Station [object_id] => 369 [term_id] => 9 ) [43] => stdClass Object ( [ID] => 438 [slug] => rtk-gnss-receiver [date] => 2021-10-18 [post_status] => publish [post_type] => post [post_date] => 2021-10-18 10:28:00 [post_author] => 2 [post_title] => How to use a RTK GNSS Receiver for Android: A Step-by-Step Guide [post_name] => how-to-use-a-rtk-gnss-receiver-for-android-a-step-by-step-guide [name] => RTK GNSS Receiver [object_id] => 438 [term_id] => 14 ) [44] => stdClass Object ( [ID] => 438 [slug] => gps-gnss-by-android [date] => 2021-10-18 [post_status] => publish [post_type] => post [post_date] => 2021-10-18 10:28:00 [post_author] => 2 [post_title] => How to use a RTK GNSS Receiver for Android: A Step-by-Step Guide [post_name] => how-to-use-a-rtk-gnss-receiver-for-android-a-step-by-step-guide [name] => GPS / GNSS by Android [object_id] => 438 [term_id] => 35 ) [45] => stdClass Object ( [ID] => 1581 [slug] => rtk-base-station [date] => 2024-02-24 [post_status] => publish [post_type] => post [post_date] => 2024-02-24 23:23:52 [post_author] => 2 [post_title] => Navisys GR-903, GR-9028, and GR-9029 side-by-side comparison table [post_name] => navisys-gr-903-gr-9028-and-gr-9029-side-by-side-comparison-table [name] => RTK Base Station [object_id] => 1581 [term_id] => 8 ) [46] => stdClass Object ( [ID] => 1581 [slug] => rtk-gnss-logger [date] => 2024-02-24 [post_status] => publish [post_type] => post [post_date] => 2024-02-24 23:23:52 [post_author] => 2 [post_title] => Navisys GR-903, GR-9028, and GR-9029 side-by-side comparison table [post_name] => navisys-gr-903-gr-9028-and-gr-9029-side-by-side-comparison-table [name] => RTK GNSS logger [object_id] => 1581 [term_id] => 13 ) [47] => stdClass Object ( [ID] => 1581 [slug] => rtk-gnss-receiver [date] => 2024-02-24 [post_status] => publish [post_type] => post [post_date] => 2024-02-24 23:23:52 [post_author] => 2 [post_title] => Navisys GR-903, GR-9028, and GR-9029 side-by-side comparison table [post_name] => navisys-gr-903-gr-9028-and-gr-9029-side-by-side-comparison-table [name] => RTK GNSS Receiver [object_id] => 1581 [term_id] => 14 ) [48] => stdClass Object ( [ID] => 901 [slug] => rtk-ntrip [date] => 2023-11-10 [post_status] => publish [post_type] => post [post_date] => 2023-11-10 09:30:40 [post_author] => 2 [post_title] => NTRIP Casters in the Real World [post_name] => ntrip-casters-in-the-current-real-world [name] => RTK NTRIP [object_id] => 901 [term_id] => 11 ) [49] => stdClass Object ( [ID] => 886 [slug] => rtk-technology [date] => 2023-11-25 [post_status] => publish [post_type] => post [post_date] => 2023-11-25 11:00:31 [post_author] => 2 [post_title] => NTRIP RTK products buyers' guide [post_name] => ntrip-rtk-products-buyers-guide [name] => RTK GNSS [object_id] => 886 [term_id] => 32 ) [50] => stdClass Object ( [ID] => 1855 [slug] => ppk-technology [date] => 2024-08-27 [post_status] => publish [post_type] => post [post_date] => 2024-08-27 22:04:50 [post_author] => 2 [post_title] => PPK (Post-Processed Kinematic) by using the Columbus EX-1 GNSS Data Logger [post_name] => ppk-post-processed-kinematic-by-using-the-columbus-ex-1-gnss-data-logger [name] => PPK [object_id] => 1855 [term_id] => 48 ) [51] => stdClass Object ( [ID] => 2007 [slug] => rtk-fix-base-station [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:07:49 [post_author] => 2 [post_title] => RTK / PPK Base Station Accuracy: Long-Duration Survey-In vs. PPP (Precise Point Positioning) [post_name] => rtk-ppk-base-station-accuracy-long-duration-survey-in-vs-ppp-precise-point-positioning [name] => RTK Fix Base Station [object_id] => 2007 [term_id] => 9 ) [52] => stdClass Object ( [ID] => 2007 [slug] => ppk-technology [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:07:49 [post_author] => 2 [post_title] => RTK / PPK Base Station Accuracy: Long-Duration Survey-In vs. PPP (Precise Point Positioning) [post_name] => rtk-ppk-base-station-accuracy-long-duration-survey-in-vs-ppp-precise-point-positioning [name] => PPK [object_id] => 2007 [term_id] => 48 ) [53] => stdClass Object ( [ID] => 1117 [slug] => rtk-ntrip [date] => 2023-08-26 [post_status] => publish [post_type] => post [post_date] => 2023-08-26 16:31:45 [post_author] => 2 [post_title] => Setting Up a Free NTRIP client with RTKLib’s STRSVR [post_name] => setting-up-a-free-ntrip-client-with-rtklibs-strsvr [name] => RTK NTRIP [object_id] => 1117 [term_id] => 11 ) [54] => stdClass Object ( [ID] => 1117 [slug] => rtk-gnss-receiver [date] => 2023-08-26 [post_status] => publish [post_type] => post [post_date] => 2023-08-26 16:31:45 [post_author] => 2 [post_title] => Setting Up a Free NTRIP client with RTKLib’s STRSVR [post_name] => setting-up-a-free-ntrip-client-with-rtklibs-strsvr [name] => RTK GNSS Receiver [object_id] => 1117 [term_id] => 14 ) [55] => stdClass Object ( [ID] => 1117 [slug] => rtk-software [date] => 2023-08-26 [post_status] => publish [post_type] => post [post_date] => 2023-08-26 16:31:45 [post_author] => 2 [post_title] => Setting Up a Free NTRIP client with RTKLib’s STRSVR [post_name] => setting-up-a-free-ntrip-client-with-rtklibs-strsvr [name] => RTK Software [object_id] => 1117 [term_id] => 46 ) [56] => stdClass Object ( [ID] => 1075 [slug] => rtk-fix-base-station [date] => 2023-11-26 [post_status] => publish [post_type] => post [post_date] => 2023-11-26 14:54:02 [post_author] => 2 [post_title] => Setting Up a Free NTRIP Server with RTKLib's STRSVR [post_name] => setting-up-a-free-ntrip-server-with-rtklibs-strsvr [name] => RTK Fix Base Station [object_id] => 1075 [term_id] => 9 ) [57] => stdClass Object ( [ID] => 1075 [slug] => rtk-ntrip [date] => 2023-11-26 [post_status] => publish [post_type] => post [post_date] => 2023-11-26 14:54:02 [post_author] => 2 [post_title] => Setting Up a Free NTRIP Server with RTKLib's STRSVR [post_name] => setting-up-a-free-ntrip-server-with-rtklibs-strsvr [name] => RTK NTRIP [object_id] => 1075 [term_id] => 11 ) [58] => stdClass Object ( [ID] => 1075 [slug] => rtk-software [date] => 2023-11-26 [post_status] => publish [post_type] => post [post_date] => 2023-11-26 14:54:02 [post_author] => 2 [post_title] => Setting Up a Free NTRIP Server with RTKLib's STRSVR [post_name] => setting-up-a-free-ntrip-server-with-rtklibs-strsvr [name] => RTK Software [object_id] => 1075 [term_id] => 46 ) [59] => stdClass Object ( [ID] => 1220 [slug] => rtk-base-station [date] => 2023-11-09 [post_status] => publish [post_type] => post [post_date] => 2023-11-09 23:58:46 [post_author] => 2 [post_title] => Setting Up the ByNav C2-M2X RTK GNSS Module as Either an RTK Base or Rover [post_name] => setting-up-the-bynav-c2-m2x-rtk-gnss-module-as-either-an-rtk-base-or-rover [name] => RTK Base Station [object_id] => 1220 [term_id] => 8 ) [60] => stdClass Object ( [ID] => 1220 [slug] => rtk-fix-base-station [date] => 2023-11-09 [post_status] => publish [post_type] => post [post_date] => 2023-11-09 23:58:46 [post_author] => 2 [post_title] => Setting Up the ByNav C2-M2X RTK GNSS Module as Either an RTK Base or Rover [post_name] => setting-up-the-bynav-c2-m2x-rtk-gnss-module-as-either-an-rtk-base-or-rover [name] => RTK Fix Base Station [object_id] => 1220 [term_id] => 9 ) [61] => stdClass Object ( [ID] => 1220 [slug] => rtk-rover [date] => 2023-11-09 [post_status] => publish [post_type] => post [post_date] => 2023-11-09 23:58:46 [post_author] => 2 [post_title] => Setting Up the ByNav C2-M2X RTK GNSS Module as Either an RTK Base or Rover [post_name] => setting-up-the-bynav-c2-m2x-rtk-gnss-module-as-either-an-rtk-base-or-rover [name] => RTK Rover [object_id] => 1220 [term_id] => 12 ) [62] => stdClass Object ( [ID] => 1220 [slug] => rtk-gnss-receiver [date] => 2023-11-09 [post_status] => publish [post_type] => post [post_date] => 2023-11-09 23:58:46 [post_author] => 2 [post_title] => Setting Up the ByNav C2-M2X RTK GNSS Module as Either an RTK Base or Rover [post_name] => setting-up-the-bynav-c2-m2x-rtk-gnss-module-as-either-an-rtk-base-or-rover [name] => RTK GNSS Receiver [object_id] => 1220 [term_id] => 14 ) [63] => stdClass Object ( [ID] => 1361 [slug] => rtk-gnss-logger [date] => 2023-12-15 [post_status] => publish [post_type] => post [post_date] => 2023-12-15 11:43:42 [post_author] => 2 [post_title] => Stakeouts with Navisys GR-9029 RTK GNSS [post_name] => stakeouts-with-the-navisys-gr-9029-rtk-gnss [name] => RTK GNSS logger [object_id] => 1361 [term_id] => 13 ) [64] => stdClass Object ( [ID] => 1134 [slug] => rtk-ntrip [date] => 2023-11-27 [post_status] => publish [post_type] => post [post_date] => 2023-11-27 17:35:51 [post_author] => 2 [post_title] => The Free NTRIP Caster from GPSWebShop / CanadaGPS [post_name] => the-free-ntrip-caster-from-gpswebshop [name] => RTK NTRIP [object_id] => 1134 [term_id] => 11 ) [65] => stdClass Object ( [ID] => 687 [slug] => sub-meter-gps-gnss [date] => 2019-06-24 [post_status] => publish [post_type] => post [post_date] => 2019-06-24 15:10:00 [post_author] => 2 [post_title] => The most detailed explanation of P-10 Pro accuracy. [post_name] => the-most-detailed-explanation-of-p-10-pro-accuracy [name] => Sub-Meter GPS / GNSS [object_id] => 687 [term_id] => 6 ) [66] => stdClass Object ( [ID] => 700 [slug] => sub-meter-gps-gnss [date] => 2022-08-24 [post_status] => publish [post_type] => post [post_date] => 2022-08-24 15:59:00 [post_author] => 2 [post_title] => The static drift filter of Columbus P-7 Pro. [post_name] => the-static-drift-filter-of-columbus-p-7-pro [name] => Sub-Meter GPS / GNSS [object_id] => 700 [term_id] => 6 ) [67] => stdClass Object ( [ID] => 555 [slug] => gps-gnss-by-windows [date] => 2021-10-18 [post_status] => publish [post_type] => post [post_date] => 2021-10-18 14:32:00 [post_author] => 2 [post_title] => Uninstall "Windows Location Sensor": A Step-by-Step Guide [post_name] => uninstall-windows-location-sensor-a-step-by-step-guide [name] => GPS / GNSS by Windows [object_id] => 555 [term_id] => 33 ) [68] => stdClass Object ( [ID] => 854 [slug] => rtk-ntrip [date] => 2023-08-09 [post_status] => publish [post_type] => post [post_date] => 2023-08-09 09:59:29 [post_author] => 2 [post_title] => User Guide - Setting Up GR-9028 Portable RTK Base (with Android phone or tablet) [post_name] => instructions-for-setting-up-gr-9028-portable-rtk-base-with-android-phone-or-tablet [name] => RTK NTRIP [object_id] => 854 [term_id] => 11 ) [69] => stdClass Object ( [ID] => 811 [slug] => rtk-portable-base-station [date] => 2023-08-08 [post_status] => publish [post_type] => post [post_date] => 2023-08-08 13:25:46 [post_author] => 2 [post_title] => User Guide - Setting Up GR-9028 Portable RTK Base (with iPhone/iPad) [post_name] => instructions-for-setting-up-gr-9028-portable-rtk-base-with-iphone-ipad [name] => RTK Portable Base Station [object_id] => 811 [term_id] => 42 ) [70] => stdClass Object ( [ID] => 984 [slug] => rtk-gnss-logger [date] => 2023-08-08 [post_status] => publish [post_type] => post [post_date] => 2023-08-08 19:36:56 [post_author] => 2 [post_title] => User Guide - Setting Up GR-9029 RTK GNSS Data Logger (with Android phone or tablet) [post_name] => user-guide-setting-up-gr-9029-rtk-gnss-data-logger-with-android-phone-or-tablet [name] => RTK GNSS logger [object_id] => 984 [term_id] => 13 ) [71] => stdClass Object ( [ID] => 954 [slug] => rtk-gnss-logger [date] => 2023-08-09 [post_status] => publish [post_type] => post [post_date] => 2023-08-09 16:09:23 [post_author] => 2 [post_title] => User Guide - Setting Up GR-9029 RTK GNSS Data Logger (with iPhone/iPad) [post_name] => user-guide-setting-up-gr-9029-rtk-gnss-data-logger-with-iphone-ipad [name] => RTK GNSS logger [object_id] => 954 [term_id] => 13 ) [72] => stdClass Object ( [ID] => 1508 [slug] => rtk-gnss-logger [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:02:43 [post_author] => 2 [post_title] => User Guide – How to Set Up GR-903 as a RTK GNSS Data logger Using the "SPPRTK" Android App? [post_name] => user-guide-how-to-set-up-gr-903-as-a-rtk-gnss-data-logger-using-the-spprtk-android-app [name] => RTK GNSS logger [object_id] => 1508 [term_id] => 13 ) [73] => stdClass Object ( [ID] => 1508 [slug] => gps-gnss-by-android [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:02:43 [post_author] => 2 [post_title] => User Guide – How to Set Up GR-903 as a RTK GNSS Data logger Using the "SPPRTK" Android App? [post_name] => user-guide-how-to-set-up-gr-903-as-a-rtk-gnss-data-logger-using-the-spprtk-android-app [name] => GPS / GNSS by Android [object_id] => 1508 [term_id] => 35 ) [74] => stdClass Object ( [ID] => 1463 [slug] => rtk-fix-base-station [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:08:19 [post_author] => 2 [post_title] => User Guide – How to Set Up GR-903 as RTK Base Station and NTRIP Server Using the "SPPRTK" Android App? [post_name] => user-guide-how-to-set-up-gr-903-as-rtk-base-station-and-ntrip-server-using-the-spprtk-android-app [name] => RTK Fix Base Station [object_id] => 1463 [term_id] => 9 ) [75] => stdClass Object ( [ID] => 1463 [slug] => gps-gnss-by-android [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:08:19 [post_author] => 2 [post_title] => User Guide – How to Set Up GR-903 as RTK Base Station and NTRIP Server Using the "SPPRTK" Android App? [post_name] => user-guide-how-to-set-up-gr-903-as-rtk-base-station-and-ntrip-server-using-the-spprtk-android-app [name] => GPS / GNSS by Android [object_id] => 1463 [term_id] => 35 ) [76] => stdClass Object ( [ID] => 1463 [slug] => rtk-portable-base-station [date] => 2024-02-25 [post_status] => publish [post_type] => post [post_date] => 2024-02-25 13:08:19 [post_author] => 2 [post_title] => User Guide – How to Set Up GR-903 as RTK Base Station and NTRIP Server Using the "SPPRTK" Android App? [post_name] => user-guide-how-to-set-up-gr-903-as-rtk-base-station-and-ntrip-server-using-the-spprtk-android-app [name] => RTK Portable Base Station [object_id] => 1463 [term_id] => 42 ) [77] => stdClass Object ( [ID] => 537 [slug] => rtk-gnss-receiver [date] => 2021-10-18 [post_status] => publish [post_type] => post [post_date] => 2021-10-18 13:17:00 [post_author] => 2 [post_title] => Utilizing a RTK GNSS Receiver for Linux: A Step-by-Step Guide [post_name] => utilizing-a-rtk-gnss-receiver-for-linux-a-step-by-step-guide [name] => RTK GNSS Receiver [object_id] => 537 [term_id] => 14 ) [78] => stdClass Object ( [ID] => 550 [slug] => rtk-gnss-logger [date] => 2020-10-18 [post_status] => publish [post_type] => post [post_date] => 2020-10-18 14:00:00 [post_author] => 2 [post_title] => Utilizing a USB/Bluetooth RTK GNSS Receiver for High Accuracy Data Logging: A Step-by-Step Guide [post_name] => utilizing-a-usb-bluetooth-rtk-gnss-receiver-for-high-accuracy-data-logging-a-step-by-step-guide [name] => RTK GNSS logger [object_id] => 550 [term_id] => 13 ) [79] => stdClass Object ( [ID] => 550 [slug] => rtk-gnss-receiver [date] => 2020-10-18 [post_status] => publish [post_type] => post [post_date] => 2020-10-18 14:00:00 [post_author] => 2 [post_title] => Utilizing a USB/Bluetooth RTK GNSS Receiver for High Accuracy Data Logging: A Step-by-Step Guide [post_name] => utilizing-a-usb-bluetooth-rtk-gnss-receiver-for-high-accuracy-data-logging-a-step-by-step-guide [name] => RTK GNSS Receiver [object_id] => 550 [term_id] => 14 ) [80] => stdClass Object ( [ID] => 488 [slug] => rtk-gnss-receiver [date] => 2021-10-20 [post_status] => publish [post_type] => post [post_date] => 2021-10-20 11:38:00 [post_author] => 2 [post_title] => Utilizing a USB/Bluetooth RTK GNSS Receiver with a Windows 10/11 Laptop: A Step-by-Step Guide [post_name] => utilizing-a-usb-bluetooth-rtk-gnss-receiver-with-a-windows-10-11-laptop-a-step-by-step-guide [name] => RTK GNSS Receiver [object_id] => 488 [term_id] => 14 ) [81] => stdClass Object ( [ID] => 488 [slug] => gps-gnss-by-windows [date] => 2021-10-20 [post_status] => publish [post_type] => post [post_date] => 2021-10-20 11:38:00 [post_author] => 2 [post_title] => Utilizing a USB/Bluetooth RTK GNSS Receiver with a Windows 10/11 Laptop: A Step-by-Step Guide [post_name] => utilizing-a-usb-bluetooth-rtk-gnss-receiver-with-a-windows-10-11-laptop-a-step-by-step-guide [name] => GPS / GNSS by Windows [object_id] => 488 [term_id] => 33 ) [82] => stdClass Object ( [ID] => 2074 [slug] => sub-meter-gps-gnss [date] => 2023-12-16 [post_status] => publish [post_type] => post [post_date] => 2023-12-16 10:10:14 [post_author] => 2 [post_title] => Why Can’t You Rely on Accuracy Readings from Some GPS/GNSS Apps for Advanced GNSS Receivers Like the Columbus P9 Race? [post_name] => why-cant-you-rely-on-accuracy-readings-from-some-gps-gnss-apps-for-advanced-gnss-receivers-like-the-columbus-p9-race [name] => Sub-Meter GPS / GNSS [object_id] => 2074 [term_id] => 6 ) [83] => stdClass Object ( [ID] => 1710 [slug] => sub-meter-gps-gnss [date] => 2024-08-01 [post_status] => publish [post_type] => post [post_date] => 2024-08-01 11:05:36 [post_author] => 2 [post_title] => Why can’t you rely on some GPS/GNSS apps’ accuracy readings for multi-frequency GNSS Receivers? [post_name] => why-cant-you-rely-on-some-gps-gnss-apps-accuracy-readings-for-multi-frequency-gnss-receivers [name] => Sub-Meter GPS / GNSS [object_id] => 1710 [term_id] => 6 ) )
▼GPS / GNSS by OS (18)
- ► (0)
- ►GPS / GNSS by Android (9)
- ►GPS / GNSS by IOS (0)
- ►GPS / GNSS by Linux (2)
- ►GPS / GNSS by MacOS (0)
- ►GPS / GNSS by Windows (7)
►PPK (3)
▼RTK GNSS (55)
►Sub-Meter GPS / GNSS (7)
►Uncategorized (1)