Please or Register to create posts and topics.

Unread Topics

What Is the Difference Between the Standard and Customized Wake-Up Logging Firmware on the Columbus P-10 Pro?In Columbus P-10 Pro · 1 week ago

How Much GPS Data Can the Columbus P-10 Pro Store on a 4GB microSD Card?In Columbus P-10 Pro · 1 week ago

What is the typical sleep current of the Columbus V-2000?In Columbus V-2000 · 2 weeks ago

Is there a way to turn off the status LED or lock the power button? The units will sit on the shell and get pressed against burrow walls.In Columbus V-2000 · 2 weeks ago

Can interval recording run inside a schedule window, for example Wake=13:00, Duration=14:00, LogMode=60min?In Columbus V-2000 · 2 weeks ago

Does SpeedMask apply in interval mode? Our animals rarely move faster than 0.3 km/h, so we'd set it to OFF and want to be sure every fix still gets recorded.In Columbus V-2000 · 2 weeks ago

In interval mode (say LogMode=60min), how long does the unit search for a fix before going back to sleep, and does it write anything when it can't get one?In Columbus V-2000 · 2 weeks ago

Do any of the formats (CSV, NMEA, GPX, or FUSION) record HDOP, number of satellites, or fix type? Sample files for each format would help a lot.In Columbus V-2000 · 2 weeks ago

Announces the V-2000 GNSS Data LoggerIn Columbus V-2000 · 9 months ago

P-70 Ultra Raw GNSS Observation Output and PPK Support?In Columbus P-70 Ultra · 2 months ago

why the P10 Pro occasionally creates 0-byte track files even though the device was in use?In Columbus P-10 Pro · 3 months ago

GR-M02 GNSS Aiding (A-GNSS) Support: Time, Position, Almanac & EphemerisIn Navisys GR-M02 Industrial Grade Dual-Band USB GNSS Receiver · 4 months ago

Why is my BL-1000ST emitting a constant high-pitched noise?In Qstarz BL-1000ST · 4 months ago

If I want to integrate the P-70 with my own battery and hardware system, what is the supported input voltage range?In Columbus P-70 Ultra · 5 months ago

P-10 Pro POI Button, GPX Log File Format, and Geotagging PhotosIn Columbus P-10 Pro · 5 months ago

How to connect P-70 Ultra to Android and ArcGIS Field Maps?In Columbus P-70 Ultra · 4 months ago

How to change the Update Rate of a Navisys GR-U01 (u-blox M10) GNSS Receiver?In Navisys GR-U01 Industrial Grade Ultra-low Power consumption USB GNSS Receiver · 2 years ago

Columbus P-70 Ultra Power Consumption and External Battery Pack ConsiderationsIn Columbus P-70 Ultra · 5 months ago

How to Use the GR-8018 “Save-on-Shutdown” Feature to Preserve Configuration, IMU Calibration, and Satellite Orbit Knowledge?In Navisys GR-8018 50Hz USB GNSS Receiver · 5 months ago

How to Turn UDR (Untethered Dead Reckoning) On or Off on the GR-8018?In Navisys GR-8018 50Hz USB GNSS Receiver · 5 months ago

GR-8018 UDR Not Showing as Enabled in NaviViewer After Standard GPS TestIn Navisys GR-8018 50Hz USB GNSS Receiver · 5 months ago

What Is the 6th Pin for the RS232 Version of the GR-8018 (GR-8018R)?In Navisys GR-8018 50Hz USB GNSS Receiver · 5 months ago

GR-8018 RS-232 Output and IMU/UDR Data AvailabilityIn Navisys GR-8018 50Hz USB GNSS Receiver · 5 months ago

GR-8018U Dead Reckoning Calibration Not Retained After Long Power-Off PeriodIn Navisys GR-8018 50Hz USB GNSS Receiver · 5 months ago

550 Columbus P-1 Mark II GNSS Data Loggers Deployed in Remote African Field StudyIn Columbus P-1 Mark II · 6 months ago

What is the default NMEA 0183 output version of the GR-8018?In Navisys GR-8018 50Hz USB GNSS Receiver · 6 months ago

Why Is the Velocity Accuracy of a UDR GNSS Receiver Sometimes Lower Than That of a Non-UDR GNSS Receiver?In Navisys GR-8018 50Hz USB GNSS Receiver · 6 months ago

Practical Notes for Using a Power Bank with Columbus P-70 Ultra, P-9 Race, and P-7 ProIn Columbus P-7 Pro · 7 months ago

Practical Notes for Using a Power Bank with Columbus P-70 Ultra, P-9 Race, and P-7 ProIn Columbus P-9 Race · 7 months ago

Practical Notes for Using a Power Bank with Columbus P-70 Ultra, P-9 Race, and P-7 ProIn Columbus P-70 Ultra · 7 months ago

Upgraded P-7 Pro Antenna (effective March 26, 2026):In Columbus P-7 Pro · 7 months ago

How to modify the output messages of the EX-1?In Columbus EX-1 · 7 months ago

SPPRTK (Android) app now officially supports the Navisys GR-903 RTK GNSS receiver via USB connection.In Navisys GR-903 · 9 months ago

Why does the P-1 Mark II or P-10 Pro make a slight sound when shaken?In Columbus P-1 Mark II · 11 months ago

How to restore the factory settings of P-7 Pro?In Columbus P-7 Pro · 11 months ago

How can P-7 Pro users outside Asia optimize their GNSS constellation settings?In Columbus P-7 Pro · 11 months ago

Need help troubleshooting P-7 ProIn Columbus P-7 Pro · 11 months ago

How to reset the EX-1 GNSS data loggerIn Columbus EX-1 · 12 months ago

Where can I find the EX-1 firmware file - EX1.bin?In Columbus EX-1 · 12 months ago

Why does the P-7 Pro have only limited support for iOS and iPadOS?In Columbus P-7 Pro · 12 months ago

Why can’t my config.txt file be recognized by the EX-1?In Columbus EX-1 · 1 year ago

How to change the update rate of the Navisys GR-M02 GNSS receiver?In Navisys GR-M02 Industrial Grade Dual-Band USB GNSS Receiver · 2 years ago

Workaround for P-7 Pro Connection Issue with “Bluetooth GNSS” App - v1.0.69In Columbus P-7 Pro · 2 years ago

Why does the P-7 Pro show fewer satellites and constellations compared to other GNSS receivers?In Columbus P-7 Pro · 2 years ago

Could you explain why the P-70 Ultra has only limited support for iOS and iPadOS?In Columbus P-70 Ultra · 2 years ago

What is the battery runtime of the P1-M2 in Spy Mode?In Columbus P-1 Mark II · 2 years ago

Could you explain the difference between “IMU Calibration” in the “Device” menu and “IMU Initialization” in “Point Survey”?In Gintec 'CreateYours' Field Data Collection Software · 2 years ago

When collecting a data point with "CreateYours" software, the process typically takes a few seconds. Does slight movement of the survey pole affect accuracy?In Gintec 'CreateYours' Field Data Collection Software · 2 years ago

Why does the GR-9029 disconnect from my Android BLERTK app after a few minutes?In Navisys GR-9029 · 2 years ago

How to Take a Screenshot on the P3 Data Collector/Controller?In Gintec P3 Handheld Data Collector · 2 years ago