Forum Navigation
Post History: GPSWebShop Official
GBoxTools is an Android app that isn’t available on the Google Play Store. Instead, you can download …In: How to Install the GBoxTools Android App?
2 weeks ago
The X8-M1 uses a spiral antenna, with positioning readings referenced from the center of the antenna …In: Which part of the X8-M1 does the positioning reading refer to?
2 weeks ago
1. Power On the GNSS Receiver
•Connect the Columbus P-9 Race GNSS receiver to a USB charger or powe …In: How to Pair the P-9 Race with Windows 11 via Bluetooth?
2 months ago
Please refer to the official Columbus article below and make sure to follow each step as described.
…In: What should I do if my P-10 Pro fails to boot after a firmware upgrade?
2 months ago
Columbus has published field tests for the EX-1 covering four different scenarios. They provide samp …In: Where can I find sample data recorded by the Columbus EX-1 for download?
3 months ago
Please refer to the Qstarz Official site.
http://racing.qstarz.com/Products/LT-8000S.html
I pasted …In: Side by side comparision: LT-8000S vs LT-8000GT vs LT-6000S
3 months ago
The Navisys Survey Pole Adapter (as shown in the image below) is designed to connect the GR-903, GR- …In: Navisys Survey Pole Adapter Clarification
3 months ago
By default, the EX-1 “Base” mode has MSM4 enabled and MSM7 disabled. This is because MSM4 has a smal …In: Notes for MSM4 vs. MSM7 in the RTCM Configuration of the EX-1
3 months ago
1. RTK Mode - Static Testing
Objective: Evaluate whether the positioning accuracy of the EX …In: EX-1 Field Test
3 months ago
The EX-1 driver is built into Windows 10/11, so there is no need to install any additional drivers. …In: Where to Download the Windows 10/11 Driver for EX-1 RTK GNSS Data Logger Receivers?
3 months ago
Step 1: Install and Launch u-center 2
1.Download and install the latest version of u-center 2 from …In: How to change the Update Rate of a Navisys GR-U01 (u-blox M10) GNSS Receiver?
3 months ago
The default update rate of the GR-M02 is 1 Hz, but you can change this setting to a different value, …In: How to change the update rate of the Navisys GR-M02 GNSS receiver?
3 months ago
The blog post below provides a more detailed explanation.
Why can’t you rely on some GPS/GNSS apps’ …In: Why is the P-7 Pro experiencing reduced accuracy when tested with certain apps?
4 months ago
https://community.geoastra.com/tech-support/In: GeoAstra Products' Support Forums - https://community.geoastra.com/tech-support/
4 months ago
5 months ago
In my testing, all power banks work initially. However, when the P-10 Pro is fully charged, the powe …In: Which power bank do you recommend for the P-10 Pro to extend its runtime?
5 months ago
The BLERTK app has recently added a new feature. In addition to using "Survey-in" to acqui …In: How the GR-9028 acquired Base Station location?
5 months ago
please connect your GR-9028 to the BLERTK app and navigate to the "Base Source" menu. You …In: How to achieve the highest accuracy
6 months ago
You could download the TimeAlbum Pro V3.0
https://cbgps.com/download/tap/3.0/TimeAlbumProMac.app.zi …In: TimeAlbum Pro V2.32 can't get maps on Apple Mac
6 months ago
The P-7 Pro has the following accuracy specifications: horizontal direction 0.5m CEP(50%) and 1.5m C …In: Geotagging Photos
6 months ago
Hi Garrett,
Yes, you can use the P-7 Pro with your Android phone for improved accuracy in photo geo …In: Geotagging Photos
6 months ago
Currently, this software does not support a shortcut key for selecting all tracks. Thanks!In: Select all tracks at once
8 months ago
Yes, in the PC version of the i-gotU software, you can check the checkboxes beside the tracks. For e …In: Select all tracks at once
8 months ago
Please refer to the official documentation provided by Columbus GPS at the following link: https://c …In: P-7 Pro documents for Developers
8 months ago
Android OS operates on a "Fused Location Provider" architecture. This means it's not …In: Android driver for Columbus
9 months ago
Please refer to the Official Columbus Instructions for guidance.
https://cbgps.com/p1m2/service/fir …In: How to Address the Columbus P1 MarkII Boot Failure Issue Following a Firmware Upgrade?
9 months ago
Please refer to the Official Columbus Instructions for guidance.
https://cbgps.com/p10/service/firm …In: How to Address the Columbus P10 Pro Boot Failure Issue Following a Firmware Upgrade?
9 months ago
The GR-903 can function as a standalone Bluetooth GPS receiver; however, it does not have a built- …In: Is it possible to connect to the GR-903 GNSS receiver via Bluetooth without using the USB cable?
12 months ago
The GR-903 driver is built into Windows 10/11, so there is no need to install any additional drivers …In: Where to Download the Windows 10/11 Driver for GR-903 RTK GNSS Receivers?
12 months ago
The compatibility list for the P-7 Pro can be found in the “Apps” section on the official Columbus w …In: Where is the p-7 Pro compatible list?
12 months ago
To record a Point of Interest (POI), press the designated button. The recorded POI will be visible i …In: How to use the POI Feature on the GT-120B/GT-600B?
1 year ago
Please refer to the image below. It is printed on the retail box.
In: Could you clarify the meanings of the LED indicators on the GT-120B/600B?
1 year ago
I wanted to share a video that demonstrates the use of the Qstarz BLE receiver with this feature. Th …In: Can I use the Qstarz BL-818GT and BL-1000GT as GNSS receivers on Android?
1 year ago
I wanted to share a video that demonstrates the use of the Qstarz BLE receiver with this feature. Th …In: Can I use the Qstarz BL-818GT and BL-1000GT as GNSS receivers on Android?
1 year ago
Yes, the LT-8000GT is compatible with the standard 1/4-inch screw.
This means users have the flexib …In: Can I utilize 3rd-party mounting kits for the Qstarz LT-8000GT lap timer?
1 year ago
I've learned that the "GPS Connector" app has now added support for Qstarz Bluetooth …In: Can I use the Qstarz BL-818GT and BL-1000GT as GNSS receivers on Android?
1 year ago
I've learned that the "GPS Connector" app has now added support for Qstarz Bluetooth …In: Can I use the Qstarz BL-818GT and BL-1000GT as GNSS receivers on Android?
1 year ago
Thanks for sending the CSV file.
The problem isn't related to the GT-600B device or the " …In: export csv file, decimals separated with comma (,) instead dot (.)
1 year ago
That sounds strange to me. Could you please email the CSV file you exported from the GT-600B to info …In: export csv file, decimals separated with comma (,) instead dot (.)
1 year ago
CSV" stands for "Comma-Separated Values." As the name suggests, it's a file form …In: export csv file, decimals separated with comma (,) instead dot (.)
1 year ago
When you open the CSV file using a text editor, you'll see the commas. However, I tried opening …In: export csv file, decimals separated with comma (,) instead dot (.)
1 year ago
You can try resetting the P-10 Pro using the reset button. Please refer to this post for more detail …In: What should I do if the GNSS status lamp on my P-10 Pro remains static on?
1 year ago
You could download the GnssToolKit below, which is by default in English:
https://gpswebshop-downlo …In: Is it possible to reset Columbus V-800 Mark III?
1 year ago
The default factory settings for the V-800 Mark III are as follows:
Multi-GNSS: GPS, GLONASS, BeiDo …In: Is it possible to reset Columbus V-800 Mark III?
1 year ago
No, the P-7 Pro doesn't support raw data output. Another option is the Columbus P-9 Race GNSS r …In: How to record Raw GPS for static on P-7 pro
1 year ago
GR-9028 utilizes the “Survey-in” method to acquire the base station’s position. This process can be …In: How the GR-9028 acquired Base Station location?
1 year ago
We highly suggest the GR-9028 Portable RTK Base for your very own NTRIP correction service. It works …In: Which NTRIP correction services do you recommend for GR-9029?
1 year ago
Criteria for creating new log files:
When the file size exceeds 2MB (on iOS) or 4MB (on Android), a …In: What is the criteria for the "BLERTK" app creating new log file?
1 year ago