-
Build your very own NTRIP RTK Base with just an RTK GNSS Receiver and 5 minutes
Setting up your own RTK Base for online access to serve NTRIP clients is easier than you might think. All you need is an RTK…
-
How to configure the Columbus EX-1 as an RTK/PPK Base Station in a Production Environment
The accuracy of the RTK/PPK base station’s position is critical because any errors in its location will directly impact the rover’s absolute positioning accuracy. The…
-
PPK (Post-Processed Kinematic) by using the Columbus EX-1 GNSS Data Logger
If real-time internet or radio connections between the rover and base station are limited or unavailable, or if immediate positioning results are not required, you…
-
Why can’t you rely on some GPS/GNSS apps’ accuracy readings for multi-frequency GNSS Receivers?
Many apps on the market calculate accuracy based on a single-frequency satellite system, where the accuracy values are estimated using horizontal dilution of precision (HDOP)…
-
How accurate does your RTK base need to be?
To address this, it’s important to understand two concepts: Absolute Positioning and Relative Positioning: How accurate does your RTK base need to be? If your…