Support ForumsPost History: GPSWebShop Official

Please or Register to create posts and topics.

Post History: GPSWebShop Official

GPSWebShop Official

Administrator

The P-7 Pro location data output represents the location of the antenna.In: Does the location data output from P-7 pro represent the location of the antenna or the main unit?

1 year ago

There are a few reasons why this might be the case. First of all, there aren't many SBAS satell …In: Are you having trouble seeing SBAS satellites even though you've enabled them in your P-7 Pro?

1 year ago

The P-9 Race's main unit cannot operate without being connected to an external antenna, An exte …In: Is it possible for the main unit of the P-9 Race to function without being connected to the antenna?

1 year ago

As a standard USB to serial port device, the P-9 Race is compatible with any commonly used baud rate …In: What is the baud rate for output from the P-9 Race?

1 year ago

The P-9 Race location data output refers to the location of the antenna.In: When the P-9 Race outputs location data, is it referring to the position of the antenna or the main unit?

1 year ago

Check out this article on the manufacturer's blog for more information. https://cbgps.com/p9/a …In: How to view the positioning information output by P-9 Race?

1 year ago

Check out this article on the manufacturer's blog for more information. https://cbgps.com/p1m2 …In: Troubleshooting Unexpected Shutdowns on the P-10 Pro: Symptoms, and Solutions.

1 year ago

Check out this article on the manufacturer's blog for more information. https://cbgps.com/p10/ …In: How to Record Tracks Using a MicroSD Card (64G and Above) on P-10 Pro?

1 year ago

Many apps in the market calculate accuracy based on a single frequency satellite system, where the a …In: Why is the P-7 Pro experiencing reduced accuracy when tested with certain apps?

1 year ago

Many apps in the market calculate accuracy based on a single frequency satellite system, where the a …In: Why is the P-10 Pro experiencing reduced accuracy when tested with certain apps?

1 year ago

The occurrence of "5 short beeps" indicates a file format error. This usually happens when …In: Why am I hearing 5 short beeps instead of 1 long beep when configuring the P-10 Pro?

1 year ago

Please Check out the manufacturer's blog post below for more information. https://cbgps.com/do …In: How to get a high accuracy GPS track?

1 year ago

The below table side by side compares the 2 high accuracy GNSS positioning technologies. RTK and Col …In: Comparing High Accuracy GNSS Positioning Technologies: RTK vs. Dual-Frequency

1 year ago

For firmware update instructions, please visit http://cbgps.com/p10/firmware/index_en.html. Here ar …In: Columbus P-10 Pro firmware update and factory reset instructions

1 year ago

In the situation of : If you try to downgrade the P-10 pr firmware to a previous version, it will f …In: How to fix the "freeze" issue when updating the firmware of Columbus P-10 Pro?

1 year ago

The TOP608BT driver is built into Windows 10/11, so there is no need to install any additional drive …In: Where to Download the Windows 10/11 Driver for TOP608BT GNSS Receivers?

1 year ago

The TOP608BT can function as a standalone Bluetooth GPS receiver; however, it does not have a built- …In: Is it possible to connect to the TOP608BT GNSS receiver via Bluetooth without using the USB cable?

1 year ago